Policies define rules for monitoring your vehicles. When a vehicle breaches or triggers a configured policy, the platform can notify you by email and through the KATSANA iOS or Android app.
Open Policies
Click Policies in the main menu. The List of Policies is where you add and manage policies.
Choose a policy type
Click Add New Policy, then select the required type.
Field | Meaning |
|---|---|
Speed Limit | Set the maximum permitted travelling speed. Multiple policies can be used for different vehicle types. |
Area | Define a geographic boundary that vehicles must stay within or must never enter. A vehicle can have only one Area policy. |
Movement | Set when vehicle movement is allowed or restricted. Multiple Movement policies must not contradict each other. |
Checkpoint | Monitor vehicles visiting or stopping at defined locations. Up to three checkpoint policies are allowed per account, with unlimited checkpoints per policy and per vehicle. |
Excessive Idling | Set the maximum permitted idling duration for one idle event. Multiple policies can apply different limits to selected vehicles. |
Continuous Usage | Set continuous vehicle usage and required rest periods. |
Siphoning | Set the fuel quantity threshold for fuel drawn from the tank. Requires an additional fuel module. |
Temperature | Set the lowest and highest permitted temperature readings for the vehicle. |
Refuel | Set the threshold for fuel added to the tank. Requires an additional fuel module. |
Common policy settings
Field | Meaning |
|---|---|
Policy Name | A descriptive name used to distinguish and organise the policy in the list. |
E-mail Notification | Choose Yes to receive email alerts when the policy is breached or triggered, or No to disable email alerts. |
Active | Choose Yes to activate the policy for assigned vehicles, or No to keep it inactive. |
Speed Limit
- Choose Speed Limit.
- Enter a Policy Name and the Speed Limit in km/h, the highest permitted vehicle speed.
- Set E-mail Notification and Active, then click Next.
- Select vehicles by clicking their plate numbers. A green tick indicates selection. Use Select All to include all vehicles.
- Click Next to review the defined policy and selected vehicles.
- Use Prev to make changes, or click Submit to finish.
Area
- Choose Area.
- Enter the Policy Name and set E-mail Notification and Active.
- Choose the Area Setting: Always within the area alerts when the vehicle exits; The vehicle should never enter the area alerts when it enters.
- Click Draw to draw the boundary on the map.
Draw the boundary
Drag the map to find the area. Use the zoom controls or mouse wheel to adjust the scale. Click points along the boundary to form a closed loop; the selected area is highlighted in pink. Use a mouse for easier positioning.
Click Reset to clear the boundary, then click Draw to draw it again.
Click Next, select the vehicles, and click Save. Use Prev if changes are needed. The saved policy appears in the List of Policies.
Movement
- Choose Movement.
- Enter the Policy Name, Days, and Time range.
- Choose the Time Option: Allow vehicle movement (Working Time) or Restrict vehicle movement (Parking Time).
- Set E-mail Notification and Active, then click Next.
- Select the vehicles and click Next.
- Review the summary. Use Prev to make changes or Submit to finish.
If using multiple Movement policies, ensure their schedules do not conflict.
Checkpoint
- Choose Checkpoint.
- Enter the Policy Name and set E-mail Notification and Active.
- Click Add Checkpoint to add a location to the map.
Set checkpoint locations
Drag the map to find the location, or paste its coordinates into the map search bar and press Enter. Use the zoom controls or mouse wheel to adjust the scale.
Click Add Checkpoint and drag the map pointer to the required location. Rename the checkpoint and set its radius from 10 to 200 metres. Click Add Checkpoint again to add more locations.
Click Next, select the vehicles, and click Save. Use Prev if changes are needed.
Excessive Idling
- Choose Excessive Idling.
- Enter the Policy Name and Allowed Idle in Minutes, the maximum idling time for a single idle event. The minimum setting is 10 minutes.
- Set E-mail Notification and Active, then click Next.
- Select the vehicles and click Next.
- Review the summary. Use Prev to make changes or Submit to finish.
Siphoning
Requirement: an additional fuel module must be installed on the vehicle.
- Choose Siphoning.
- Enter the Policy Name and Minimum Siphoning %, the minimum quantity of fuel drawn from the tank that triggers the policy.
- Set E-mail Notification and Active, then click Next.
- Select the vehicles and click Next.
- Review the summary. Use Prev to make changes or Submit to finish.
A value of 100% represents the full fuel tank capacity configured in Vehicle Information > Fuel. Multiple policies can use different limits for different vehicles.
Calculate the siphoning threshold
Fuel quantity (L) = tank capacity (L) × minimum siphoning percentage ÷ 100.
Example: a 180 L tank at 20% gives 180 × 20 ÷ 100 = 36 L.
Minimum siphoning percentage = fuel quantity (L) ÷ tank capacity (L) × 100.
Example: 80 L from a 180 L tank gives 80 ÷ 180 × 100 = approximately 44.4% (about 44%).
Refuel
Requirement: an additional fuel module must be installed on the vehicle.
- Choose Refuel.
- Enter the Policy Name and Minimum Refuel %, the refuelling quantity threshold as a percentage of the tank capacity.
- Set E-mail Notification and Active, then click Next.
- Select the vehicles and click Next.
- Review the summary. Use Prev to make changes or Submit to finish.
A value of 100% represents the full tank capacity configured in Vehicle Information > Fuel.
Calculate the refuelling threshold
Fuel quantity (L) = tank capacity (L) × minimum refuel percentage ÷ 100.
Example: a 240 L tank at 20% gives 240 × 20 ÷ 100 = 48 L.
Minimum refuel percentage = fuel quantity (L) ÷ tank capacity (L) × 100.
Example: 200 L in a 240 L tank gives 200 ÷ 240 × 100 = approximately 83.3%. The illustrated selector has no 83% option, so choose the nearest available value, 85%.
Temperature
Use this policy for vehicles with temperature readings available from their installed sensors.
- Choose Temperature.
- Enter the Policy Name and Temperature Range, specifying the lowest and highest permitted readings.
- Set E-mail Notification and Active, then click Next.
- Select the vehicles and click Next.
- Review the summary. Use Prev to make changes or Submit to finish.
Continuous Usage
- Choose Continuous Usage.
- Enter the Policy Name.
- Set Continuous Usage Duration in Hours, the continuous operating time allowed per trip.
- Set Rest Duration in Minutes, the required rest time after a trip.
- Set E-mail Notification and Active, then click Next.
- Select the vehicles and click Next.
- Review the summary. Use Prev to make changes or Submit to finish.
Manage the List of Policies
Newly saved policies appear in the List of Policies. Use the filters above the list to filter by Status and Type.
Edit a policy
Click the Edit control in the policy's Action column.
Enable or disable a policy
Use the Action toggle to turn a policy on (active) or off (inactive).
Delete a policy
Click the Delete control in the policy's Action column.
